PEAK-System Technik PCAN-DONGLE IPEH-002015 User Manual

PCAN-Dongle (ISO) – User Manual 

 

 

Figure 5: Selection of hardware resources 

 

3.  Enter the port address and the interrupt of the used parallel 

interface established before (see section above). 

4.  Confirm your input with OK. 

 
In the dialog box "Connect to CAN hardware" make further settings 
(baud rate and CAN message filter) for the created hardware entry. 

 
If you need further help after the program start, use the online help 

provided with the program (key [F1]). 
 

4.2

Getting Started under DOS 

4.2.1

Information about the Parallel Interface 

You need information about the used interrupt and port address of 

the parallel interface. It can be determined with the MS-DOS tool 
MSD (MSD.EXE in the DOS directory). 

The following table gives an overview of the common port 

addresses and interrupts for the parallel port at the PC. 
 

15