Transition Networks INDUSTRIAL DEVICE SERVER RS-232-TO-100BASE-FX User Manual
SDSFE31xx-100 Industrial Device Server
Transition Networks
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
39
Configuration software, continued
IP trap
manager
submenu
manager
submenu
Click the “IP Trap Manager” link to launch the IP Trap manager submenu option,
shown in Figure 40.
shown in Figure 40.
Figure 40: IP Trap Manager Option display
Table 2 describes the fields on the IP Trap Manager display.
Table 2: IP Trap Parameters and Descriptions
Parameter
Description
IP Address
Enter the IP address(s) of the terminal(s) that you want to
monitor for failures. When a failure occurs, an alarm will be
sent if enabled. Enter their community names and disable or
enable their alarm function accordingly.
monitor for failures. When a failure occurs, an alarm will be
sent if enabled. Enter their community names and disable or
enable their alarm function accordingly.
Community Name
SNMP community names.
Status
Alarm function: disabled or enabled.
Continued on next page