TP-LINK TL-PA6010KIT User Guide

 

22

 

Powerline adapter A and Powerline adapter B form a HomeplugAV Network, Powerline adapter C wants 
to join this network.   

Step 1.  Press and hold the Pair button on Powerline adapter C for one second.   

Step 2.  Press and hold the Pair button on Powerline adapter A/B for one second. 

(This step must be taken within 120 seconds after step 1 is finished.) 

Step 3.  Wait for about 60 seconds while your Powerline adapters are connecting. The Power LED on 

Powerline adapter A/B and C will stop flashing and become solid light when the connection is 
made. 

)

 

Note:  

The sequence of Step 1 and Step 2 can be exchanged. 

Leave an existing secured Powerline AV Network: 

As the figure above shown, Powerline adapter A, B and C have formed a HomeplugAV Network. The 
user wants to remove one device (Powerline adapter A) from this network. 

Step 1.  Press and hold the Pair button on Powerline adapter A for at least 10 seconds. Powerline 

adapter A will reset and restart. (The Power LED of Powerline adapter A will momentarily 
extinguish during resetting, flash during restarting then illuminate steadily.) 

Step 2.    Wait for the reset to complete.