TP-LINK TG-3269 User Guide
TG-3269
Gigabit PCI Network Adapter
3
¾
PCI local bus single-chip Ethernet controller
¾
Supports ACPI, PCI power management
¾
Supports Auto-Negotiation function, Auto-detects network speed
¾
Contains two large independent receive and transmit FIFOs
¾
One STP/UTP connector
¾
Provides LEDs to indicate network Link/Activity/Speed/ Duplex
¾
Supports smart remote boot ROM
¾
Supports Drivers for Linux-2.4.x, Linux-2.6.x, Windows 8 (32bit/ 64bit), Windows 7 (32bit/
64bit), Windows XP, Windows 2000, and Windows Vista (32bit/ 64bit)
1.3 LED Status
¾
10 LED, 100 LED, 1000 LED
They all indicate Link/Active/Speed status. When the 1000 LED is lit, it indicates adapter has been
linked to network with the right speed of 1000Mbps. The flash 1000 LED indicates data
transmission at the responding port. The 10 LED and 100 LED are similar to the 1000 LED.
linked to network with the right speed of 1000Mbps. The flash 1000 LED indicates data
transmission at the responding port. The 10 LED and 100 LED are similar to the 1000 LED.
¾
FDX LED
It indicates the status that whether or not the adapter works at full duplex mode. When the LED is
lit the adapter works at full duplex mode. Otherwise the adapter works at half duplex mode.
lit the adapter works at full duplex mode. Otherwise the adapter works at half duplex mode.