TP-LINK TL-PA2010KIT User Guide

 

6

 

 

)

1.  If you press the Pair button for more than 10 seconds, the Powerline Adapter will leave the network 

which it is associated with and its network name assumes a random value. The Power LED turns off 
when it disconnects from the Powerline network. 

2.  For detailed information about the Pair button, please refer to 

   

To ensure the optimum performance of the Powerline Adapter and significantly improve the transmission 
capacity of the network, we recommend that you comply with the following connection rule:   

y

 

Plug the Powerline Adapter directly into a wall socket but not the multiple sockets.   

 

For those computers you wish to be networked by Powerline Adapter, each of the computers must be 
properly connected with a Powerline Adapter through an Ethernet (RJ-45) cable. 

Following are the steps to properly connect the Powerline Adapter to your computer: 

1． Connect one end of the provided Ethernet (RJ-45) cable to the Powerline Adapter’s Ethernet port. 

2． Connect the other end of the Ethernet (RJ-45) cable to you computer’s LAN port. 

3． Plug the Powerline Adapter into a wall socket next to the computer. 

4． Turn on your computer. 

5． Check and confirm that the 

 

Power LED and 

 

Ethernet LED on the Powerline Adapter are 

ON. 

The hardware connection mechanism is shown below: