TP-LINK TL-WN951N User Manual

 

 

4

Please install the PCI adapter into your computer before installing the driver and utility software 

from the Resource CD.   

1.  Turn off your computer and unplug the power cord from the computer. 

2.  Open the case and locate an available PCI slot. Remove the metal slot cover on the back of 

the PC. Keep the screws. Turn to your computer manufacturer for instructions if needed. 

3.  Insert the PCI adapter into the PC slot. Make sure that all of its pins have touched the slot's 

contacts. Once the adapter has been firmly inserted, screw its fastening tab. Then, close your 
PC case. 

4.  Insert the power cable back into the computer and turn on your computer. 

)

Note:   

When the hardware has been successfully installed on your computer, you will be prompted 

'Found New Hardware Wizard' (as shown in Figure 2-1 and Figure 2-2); please click Cancel, 

and then follow the Software Installation steps to install driver and utility for your adapter. 

 

Figure 2-1 Found New Hardware Wizard in Windows XP