TP-LINK TL-R4299G User Manual

 

 

31

Enabled. 

¾

  Flow Control - This displays whether the Flow Control is Enabled, "Enabled" means the 

function is enabled, "Disabled" means the function is't enabled. 

¾

  Negotiation Mode - The options are: Auto Negotiation, 10M Half Duplex, 10M Full 

Duplex,100M Half Duplex,100M Full Duplex. 

¾

  Ingress Limit Mode & Ingress Limit Speed - Select the limit mode and limit speed for the 

WAN ports. 

¾

  Egress Limit & Egress Limit speed - Enable Egress Limit for WAN ports and select the limit 

speed for them. 

)

Egress speed limit is designed for controlling the broadcasting storm. When the current flux 
oversteps the setting value, the overstepped datagrams will be discarded. 

Choose menu “DHCP”, you can see the submenus under the main menu: DHCP Settings, DHCP 

Clients List and Address Reservation. 

 

Figure 4-17 

Click any of them, and you will be able to configure the corresponding function. The detailed 

explanations for each submenu are provided below. 

Choose menu “DHCP→DHCP Settings”, you can configure the DHCP in the next screen (shown 

in Figure 4-18).   

The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which 

provides the TCP/IP configuration for all the PCs that are connected to the router on the LAN.