TP-LINK TL-R4299G User Manual

 

 

2

¾

  Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter 

¾

  Ignores Ping packets from WAN or LAN ports 

¾

  Supports firmware upgrade 

¾

  Supports Remote and Web management 

Parameters provided in the pictures are just references for setting up the product, which may 
differ from the actual situation. 

You can set the parameters according to your demand. 

The front panel of the TL-R4299G consists of several LED indicators, which is designed to 

indicate connections. Viewed from left, the next table describes the LEDs on the front panel of the 

router. 

 

Figure 2-1 

Not lit 

The router is power off 

Power 

Lit up 

The router is power on 

Not lit 

The router works properly 

M1

 

Lit up 

The router has a hardware error

Not lit 

The router has a hardware error

Lit up 

The router has a hardware error

M2

 

Flashing  The router works properly 

M1 and M2 are flashing 

synchronously, the router is 

restoring the factory default 

settings. 

Not lit 

There is no device linked to the corresponding port 

Lit up 

There is a device linked to the corresponding port but no activity 

WAN/LAN 

(Link/Act)

 

Flashing  There is an active device linked to the corresponding port 

Not lit 

The linked device is running at 10Mbps 

100M(WAN)

 

Lit up 

The linked device is running at 100Mbps 

Not lit 

The linked device is running at 10Mbps or 100Mbps 

1000M(LAN)

 

Lit up 

The linked device is running at 1000Mbps