Toshiba Magnia Z300 User Manual
System Configuration Setup
SCSI Utility
155
Specifies whether logical unit numbers are supported.
c
Include in BIOS Scan
: Yes
Specifies whether the device is to be scanned when SCSI
BIOS starts.
BIOS starts.
c
Advanced Configuration Options
Sets up detailed data on the SCSI controller.
c
Reset SCSI Bus at IC Initialization
: Enabled
Specifies whether or not to reset the SCSI bus during the SCSI
controller resetting process.
controller resetting process.
c
Display <Ctrl><A> Message
During BIOS Initialization
During BIOS Initialization
: Enabled
Sets data to be displayed in the SCSI Utility startup message.
c
Extended BIOS Translation for
DOS Drive > 1Gbyte
DOS Drive > 1Gbyte
: Enabled
Specifies whether extended BIOS is to be enabled or disabled
for a DOS drive with a disk capacity exceeding 1 GB.
for a DOS drive with a disk capacity exceeding 1 GB.
c
Verbose/Silent Mode: Verbose
Controls the data displayed during startup.
c
Host Adapter BIOS
: Enabled
Enables or disables the Host SCSI Adapter BIOS.
c
Domain Validation
: Enabled
Enables or disables the Domain Validation.
c
Support Removable Disks Under
BIOS as Fixed Disks
BIOS as Fixed Disks
: Boot Only
Specifies whether removable disks are to be supported under
SCSI BIOS.BIOS
SCSI BIOS.BIOS
c
Support for Int13 Extensions
: Enabled
Enables or disables Int13 Extension.