Toshiba Magnia Z300 User Manual

180

(2) The CD-ROM drive is recognized by  MS-DOS.

To make the MS-DOS recognize the CD-ROM drive, set up the 
MS-DOS environment as mentioned in the preceding step (1) and 
set the floppy disk labeled “DOS Disk” (created by the Toshiba 
Server Setup Tool) on  the floppy disk drive. Then, operate as 
follows:

1 Create the directory XXX in the drive C for installing the CD-

ROM driver. The “XXX” is an arbitrary directory name.

2 Input “A:” and press the <Enter> key to shift it to the drive A.

3 Copy the “TEAC_CDI.SYS” from the DOS Disk in the drive 

A to the XXX directory.

4 Add the following line to the first line of the “Config.sys.” 

DEVICE=C:\XXX\TEAC_CDI.SYS /D:CD01 /P:P

5 Add the following line to the first line of the “Autoexec.bat.” 

C:\DOS\MSCDEX.EXE /D:CD01 /M:15

6 Restart the system.

When the installation of NetWare 5.1 starts, the installer detects 
the SCSI controller and the network adapter, and automatically 
assigns drivers contained on the NetWare CD-ROM.  However, 
use the driver that comes with this system instead of these drivers.

The installer detects the SCSI controller, and the following menu 
appears.

Select “Modify,” and replace the driver according to the following 
procedure: