Toshiba Magnia Z300 User Manual

187

When the NetWare installer detects the SCSI disk adapter and the 
network adapter, it displays a window as shown below.

The onboard SCSI controller, onboard network adapter, and 
RAID controller use the drivers stored on the driver disk that 
comes with your system. In this message box, therefore, proceed 
to “Select additional or modify selected Disk/LAN drivers,” and 
delete all drivers other than “IDEATA.”

After selecting the driver following the procedure of the previous 
section “Selecting the SCSI Riser Card Controller driver,” follow 
the procedure mentioned below:

1 Select “Select an additional driver.” 

2 Set the floppy disk labeled “AMI MegaRAID IDE ” (created 

with the Server Setup Tool) in the floppy disk drive.

3 Select “Install an unlisted driver <Ins>” by pressing the 

<Insert> key.

4 Press the <F3> key and specify the following directory under 

the floppy disk drive.

Choose the Server Drivers-Summary

 

This is a summary of automatically or manually 

selected devices.

Select additional drivers as needed.

 

                       

Driver names

Disk and CD-ROM Drivers:

> Adpt IDEATA

Network(LAN) Drivers

> E100B

options

Select additional or modify selected Disk/LAN 

drivers 

Continue installation