Toshiba Magnia Z300 User Manual

200

(18)When the “IP Filter List” screen is displayed, make sure that 

the “All ICMP Traffic” checkbox is marked, and select 
“Next”.

(19)When the “Filter Action” screen is displayed, mark the “Per-

mit” checkbox, and select “Next”.
The screen changes to the “Completing the New Rule Wiz-
ard” screen. Make sure that the “Edit properties” checkbox is 
marked, and select “Done”.

(20)When the “New Rule Properties” screen is displayed, make 

sure that the “All ICMP Traffic” checkbox is marked, and 
select “OK”.

(21)In the “Security rules for communicating with other comput-

ers” screen, make sure that the “All IP Traffic”, “Dynamic” 
and “All ICMP Traffic” checkboxes are marked, and select 
“Close”. Also, click the X mark at the top tight of the “Local 
Security Settings” window.

2 Setup for using the preset IP security

(1) Select the Network and Dial-up Connections on the Control 

Panel.

(2) Local Area Connection for which IPSEC is to be enabled, and 

right click to open Properties.
(In actual fact, IPSEC is enabled in common on other LAN 
settings if IPSEC is set to even one LAN setting.)
Select “Internet Protocol (TCP/IP)” and select “Properties”.
When TCP/IP Properties opens, select “Advanced”.

(3) Select the Option tab.

(4) Select “IP Security” and select “Properties”.

(5) At “Use this IP Policy”, select the policy name created at 

“Setup IP security policy (3)”.

(6) Exit the setting by “OK”.

This enables use of IPSEC on Windows 2000.