Telular SX3e User Manual

1) Locate the modular (RJ-11) line port

on your phone and plug in one end 
of a standard (RJ-11) phone cord.

2) Connect the other end of the cord 

to the RJ-11 port on the back of 
your Phonecell SX3e – see Fig. 6.

1) Pick up the phone receiver and listen

for dial tone. 

2) If you hear dial tone, make a call.
3) While you’re talking with the other

party, listen for static and echo. If you
hear either, move the antenna until
you find the spot where voice 
conversation is strong, and static 
and echo are minimized.

••

The antenna location needs to be

adjusted – see Step 1, page 6-7.

••

The NAM/Phone Number needs to

be set up – see Step 3, page 9-11.

••

Your cellular phone number has not

been activated – contact your 
cellular service provider.

Plug in an RJ-11 line splitter (not sup-
plied) to connect additional phones to
your FWT – see Fig. 7. NOTE: you can
only make one phone call at a time.

If you plan to use a device other than a
telephone with your Phonecell SX3 (such
as a modem), make sure that device will
work with a normal wired telephone line.  

Fax Machines – Connect a fax machine
the same way it needs to be set up for
use on a regular wired telephone line.   

IMPORTANT!

!

Fig. 7  Optional RJ-11 Line Splitter

lets you connect additional phone

equipment to your Phonecell SX3e.

The Phonecell SX3 lets you connect up to 5 pieces of standard telephone
equipment into a cellular network. Follow the steps below for quick installation.