Tektronix AD007 User Manual
Reference
AD007 User Manual
45
Power On
Table 2 shows the sequence of status indications for power on. To
perform or repeat the power on sequence, unplug the power to the
adapter, wait a couple of seconds, then connect the power again.
perform or repeat the power on sequence, unplug the power to the
adapter, wait a couple of seconds, then connect the power again.
Table 2: AD007 status indicators for power on
Power on status
GPIB
LAN
L-Link
Power
1. Off or power failure
Ø
Ø
Ø
Ø
2. Self testing (hardware)
G/A
G/A
G/A
G/A
3. Self test failure
R/Ø
R/Ø
R/Ø
A
A
A
A
A
4. Self test pass
G/Ø
G/Ø
G/Ø
G
5. LAN Discovery loop
(DHCP/BOOTP request)
Note: By default, the DHCP/BOOTP
request continues to loop until serviced. To
exit the loop, momentarily press the reset
button. The adapter will load the last
configuration from memory.
(DHCP/BOOTP request)
Note: By default, the DHCP/BOOTP
request continues to loop until serviced. To
exit the loop, momentarily press the reset
button. The adapter will load the last
configuration from memory.
Ø
Ø
↔
G/A
A
G
6. LAN OK
Ø
Ø
↔G/A
G
G
G = Green
R = Red
A = Amber
Ø
= Off/Idle
G/A = Toggles between green and amber
Ø
↔G/A = for LAN and GPIB, G indicates sending data, A indicates receiving
data,
Ø
indicates idle