Tektronix AD007 User Manual
Appendix A: Specifications
56
AD007 User Manual
Table 8: AD007 certifications and compliances (cont.)
Australia/New Zealand
Declaration of
Conformity -- EMC
Declaration of
Conformity -- EMC
Complies with EMC provision of Radiocommunications Act
per the following standard(s):
per the following standard(s):
AN/NZS 2064.1/2
Industrial, Scientific, and Medical
Equipment:1992
Equipment:1992
FCC Compliance
Emissions comply with FCC Code of Federal Regulations 47, Part
15, Subpart B, Class A Limits.
15, Subpart B, Class A Limits.
Pollution Degree
A measure of the contaminates that could occur in the
environment around and within a product. Typically the internal
environment inside a product is considered to be the same as the
external. Products should be used only in the environment for
which they are rated.
environment around and within a product. Typically the internal
environment inside a product is considered to be the same as the
external. Products should be used only in the environment for
which they are rated.
Pollution Degree 1
No pollution or only dry, nonconductive pollution occurs.
Products in this category are generally encapsulated,
hermetically sealed, or located in clean rooms.
Products in this category are generally encapsulated,
hermetically sealed, or located in clean rooms.
Pollution Degree 2
Normally only dry, nonconductive pollution occurs.
Occasionally a temporary conductivity that is caused by
condensation must be expected. This location is a
typical office/home environment. Temporary
condensation occurs only when the product is out of
service.
Occasionally a temporary conductivity that is caused by
condensation must be expected. This location is a
typical office/home environment. Temporary
condensation occurs only when the product is out of
service.