Nortel Networks SONAR P0992639 01 User Manual

Page of 144
90 / Registering individual portables
Modular ICS Companion Installer Guide
P0992639 01
Measuring undirected RSSI
You may want to measure the Receive Signal Strength 
Indicator between a portable and a base station radio.
1. Press 
L. Wait for dial tone.
2. Press 
*. Enter the feature code: 8 9 8. 
The display shows the radio ID of the base station to which 
the portable is linked, followed by the signal strength, for 
example 03121 - 67. In this example, the module is 03, 
the port is 12, and the radio is 1. The signal strength is 
-67dBm.
3. Read your measurement. Hand-off occurs normally.
4. To end the connection, press 
ror close the flap.
Measuring directed RSSI
You may want to measure the Receive Signal Strength 
Indicator between a portable and a specific base station radio. 
For example, you may suspect that a radio in a base station is 
not working properly. You can also use directed Receive 
Signal Strength Indicator to prevent hand-off while you find a 
cell edge. To measure the Receive Signal Strength Indicator of 
a desired radio, you must be in range of two base stations—the 
one you want to measure, and another base station. 
Receive Signal Strength Indicator applies to 
one radio in a base station.
You cannot measure the directed Receive Signal 
Strength Indicator of the other radio in the base 
station to which you are connected.