Nortel Networks CTA 500dm User Manual

 

Installation and setup   9

 

P0873832  Issue 05

 

 CTA 500

 

dm

 

 On Line Guide

Program the ICS for the CTA 500dm the same way that you program 
the ICS for a Norstar set. You can program line access, line pool 
codes and restrictions to apply to outgoing calls. The CTA 500dm 
must be assigned to a digital line or to a digital line pool. Refer to the 
ÒTerminals and sets programmingÓ section of your Installer Guide 
for more information.

The CTA 500dm is a B2 channel device and must be assigned a B2 
channel DN. The following table shows the default directory 
number (DN) that is assigned to the CTA 500dm based on the 
physical set port that connects the CTA 500dm to the ICS.

You can change the DN that is assigned to the CTA 500dm in the 
same way that you change a DN for a Norstar telephone. Refer to 
ICS Installation Guide for more information.

Note: If you use automatic telephone relocation (set relocation) to 

change the port used by a CTA 500dm, you must power down 
the CTA 500dm before changing the connections. If the 
CTA 500dm is not powered down, programming information 
will be lost. See ICS Installer Guide for more information 
about set relocation.

101

80

123

697

102

81

124

698

103

82

125

699

104

83

126

700

105

84

127

701

106

85

128

702

107

86

129

703

108

87

130

704

109

88

131

705

110

89

132

706