Nikon Printer Accessories AW110 Reference Manual

E67

GPS Options Menu

Re
feren

ce

 S

ect
io

n

B

• The electronic compass is not displayed when the camera lens is facing upwards.
• Do not use the electronic compass in this camera for mountain climbing and other specialized 

applications. The displayed information is intended as a general guide only.

• Direction may not be measured correctly near the following objects: 

magnets, metals, electrical motors, electrical home appliances or electrical power cables.

• Direction may not be measured correctly in the following places: 

in automobiles, trains, ships, airplanes, inside buildings or in underground malls

• Direction may not be measured correctly if the position information is not recorded.

B

To correct the altitude or water depth using Use GPS data of Alt./depth correction, Record GPS 
data in GPS options of the GPS options menu must be set to On and also, positioning must be 
enabled based on signals received from four or more satellites (

Press the

 d button M z (GPS options) menu icon (A8) M Altitude/depth options

Option

Description

Altimeter/depth 
gauge

On (default setting): The altimeter or depth gauge is displayed on 
the shooting screen.
Off: The altimeter or depth gauge is not displayed.

Alt./depth correction

The altitude or water depth value is compensated.
Use GPS data: The altitude is compensated using GPS.

• When the confirmation dialog is displayed, choose Yes and 

press the 

k button. The altitude is compensated using the 

displayed value.

• The data is not compensated underwater.

Correct manually: Enter the altitude or water depth to 
compensate the data. 

• Use the multi selector 

H or I to change the value and use 

the multi selector 

J or K to change the  input position of the 

digits.

• When the cursor is positioned on the rightmost digit, press 

the 

k button to set this value.

Reset: The compensation set using Use GPS data or Correct 
manually is canceled.

• When the compensation cancellation dialog is displayed, 

choose Yes and press the 

k button. The compensated value 

is cancelled.

Altitude/depth units

Set the unit of distance for displaying altitude or water depth to “m 
(meters)” (default setting) or “ft (feet).”