Nikon Printer Accessories AW110 Reference Manual

E89

Re
feren

ce

 S

ect
io

n

The following table lists the error messages and other warnings displayed on the 
monitor, as well as the solutions for dealing with them.

Display

Cause/Solution

A

O
(flashes)

Clock not set.
Set date and time.

Battery exhausted.

Battery exhausted.
Charge or replace the battery.

Battery temperature 
is elevated. The 
camera will turn off.

Battery temperature is high.
Turn off camera, and allow battery to cool down before 
resuming use. Five seconds after this message appears, the 
monitor is turned off, and the power-on lamp starts flashing 
quickly. After the lamps flash for three minutes, the camera turns 
off automatically, but you can also press the power switch to 
turn it off manually.

The camera will turn 
off to prevent 
overheating.

Inside of the camera has become hot. The camera turns off 
automatically.
Leave the camera off until the inside of the camera has cooled 
and then turn it on again.

–

Q

(flashes red)

Camera cannot focus.
• Refocus.
• Use focus lock.

Please wait for the 
camera to finish 
recording.

Camera cannot perform other operations until recording is 
complete.
Wait until message clears from display automatically when 
recording is complete.

–

Memory card is write 
protected.

Write-protect switch of the memory card is in “lock” position.
Slide the write-protect switch to “write” position.

–

Not available if Eye-Fi 
card is locked.

Write-protect switch of Eye-Fi card is in “lock” position.
Slide the write-protect switch to “write” position.

–

Error accessing Eye-Fi card.
• Check that the terminal is clean.
• Confirm that memory card is correctly inserted.

This card cannot be 
used.

Error accessing memory card.
• Use an approved card.
• Check that the terminal is clean.
• Confirm that memory card is correctly inserted.

This card cannot be 
read.