Nikon Printer Accessories AW110 Reference Manual
F4
Caring for the Products
Te
chni
chni
cal
Not
Not
e
s an
d In
de
x
x
B
Turn the Product off Before Removing or Disconnecting the Power Source
or the Memory Card
or the Memory Card
Do not remove the battery while the product is on, or while images are being saved or deleted.
Forcibly cutting power in these circumstances could result in loss of data or in damage to product
memory or internal circuitry.
Forcibly cutting power in these circumstances could result in loss of data or in damage to product
memory or internal circuitry.
B
Notes on the Monitor
• Monitors and electronic viewfinders are constructed with extremely high precision; at least 99.99%
of pixels are effective, with no more than 0.01% being missing or defective. Hence while these
displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is
not a malfunction and has no effect on images recorded with the device.
displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is
not a malfunction and has no effect on images recorded with the device.
• Due to the general characteristics of OLED monitors, prolonged or repeated display of the same
screen or image may result in screen burn. Screen burn can be recognized by decreased
brightness in portions of the monitor or mottled display. In some cases, screen burn may become
permanent. However, images are in no way affected by screen burn.
To prevent screen burn, do not set monitor brightness higher than necessary and do not display
the same screen or image for an extended period of time.
brightness in portions of the monitor or mottled display. In some cases, screen burn may become
permanent. However, images are in no way affected by screen burn.
To prevent screen burn, do not set monitor brightness higher than necessary and do not display
the same screen or image for an extended period of time.
• Images on the monitor may be difficult to see under bright lighting.
• The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your
Nikon-authorized service representative.
The Battery
• Be sure to read and follow the warnings of “For Your Safety” (
thoroughly before using the battery.
• Check the battery level before using the camera and replace or charge the
battery if necessary. Do not continue charging once the battery is fully charged
as this will result in reduced battery performance. Whenever possible, carry a
fully charged spare battery when taking pictures on important occasions.
as this will result in reduced battery performance. Whenever possible, carry a
fully charged spare battery when taking pictures on important occasions.
• Do not use the battery at ambient temperatures below -10°C (14°F) or above
40°C (104°F).
• When the battery temperature is between 0°C and 10°C (32°F to 50°F) or 45°C to
60°C (113°F to 140°F), the chargeable capacity may decrease.
• The battery is not charged at ambient temperatures below 0°C (32°F) or above
60°C (140°F).
• Note that the battery may become hot during use; wait for the battery to cool
before charging. Failure to observe these precautions could damage the
battery, impair its performance, or prevent it from charging normally.
battery, impair its performance, or prevent it from charging normally.
• On cold days, the capacity of batteries tends to decrease. Be sure that the
battery is fully charged before heading outside to take pictures in cold weather.
Keep spare batteries in a warm place and exchange as necessary. Once warmed,
a cold battery may recover some of its charge.
Keep spare batteries in a warm place and exchange as necessary. Once warmed,
a cold battery may recover some of its charge.