Nikon Printer Accessories AW110 Reference Manual

Step 1 Turn the Camera On

The 

Basic

s of 
Shootin

g

 and Playback

• When the camera is turned on, the power-on lamp (green) lights and the 

monitor is turned on (the power-on lamp turns off when the monitor is turned 
on).

• To turn off the camera, press the power switch. Both the monitor and the 

power-on lamp are turned off.

• To turn on the camera in playback mode, press and hold the 

c (playback) 

button.

• When Record GPS data in GPS options of the GPS options menu is set to On 

or while recording logs, GPS functions and log recording will continue to 
operate even after the camera is turned off (

C

If no operations are performed for a while, the monitor will turn off, the camera will enter standby 
mode, and the power-on lamp will flash. If no operations are performed for another 3 minutes, the 
camera will turn off automatically.

• While the camera is in standby mode, the monitor is turned on again when any of the following 

buttons is pressed.

➝ Power switch, shutter-release button, A (shooting mode) button, c (playback) button, or 

b (e movie-record) button

• The time that elapses before the camera enters standby mode can be changed using the Auto off 

setting in the setup menu (

A94).

• By default, the camera enters standby mode in about 1 minute when you are using shooting 

mode or playback mode.

• If you are using the AC Adapter EH-62F (available separately), the camera enters standby mode 

after 30 minutes. This setting cannot be changed.

C

Battery power drains faster than usual while the camera is recording log data (

A89) or using a Wi-Fi 

connection (