Netcomm NB1300PLUS4 User Manual
Rev. 1 - YML674
www.netcomm.com.au
NB1300Plus4 ADSL Modem
Page 21
ADSL Modem - USB
Field
Setting Details
Service name:
Blank
❖
User Name:
Blank
❖
Password:
Blank
❖
Disconnect timeout:
0
❖
Mode/Wan Connection Type:
1483 Bridged IP LLC
VPI:
8
❖
VCI:
35
❖
Static IP Address:
192.168.241.101
❖
Subnet Mask:
255.255.255.0
❖
Default Gateway:
0.0.0.0
❖
Bridge mode:
Enabled
❖
Default Setting. Although in most cases you will not be required to alter these
default settings for your NB1300Plus4, your ISP may identify specific settings to
enable connection to their service. Please refer to your ISP or Network
Administrator for further information.
default settings for your NB1300Plus4, your ISP may identify specific settings to
enable connection to their service. Please refer to your ISP or Network
Administrator for further information.
4. Click Submit and then click the Save Setting and Reboot button from the bottom of the
menu. Wait for the configuration to complete.
Step 3: Configuring your Computer/Router to use the NB1300Plus4
Install software on your computer (usually provided by your ISP) and enter a User Name and
Password. This software usually adds a PPP service to your computer.
Password. This software usually adds a PPP service to your computer.
Please refer to your ISP for more information on how to configure your software to work with
the NB1300Plus4 ADSL Modem when used as a bridge.
the NB1300Plus4 ADSL Modem when used as a bridge.