Netcomm 3G Wireless Router User N3G005W User Manual
YML894 Rev3
N3G005W 3G Wireless Router User Guide
N3G005W 3G Wireless Router User Guide
www.netcomm.com.au
45
N3G005W
For source or destination IP address, you can define a single IP address (192.168.123.1) or a range of IP
addresses (192.168.123.100-192.168.123.200). Empty fields imply all IP addresses.
For source or destination port, you can also define a single port (80) or a range of ports (1000-1999). And you
For source or destination port, you can also define a single port (80) or a range of ports (1000-1999). And you
need to add prefix “T” or “U” to specify TCP or UDP protocol e.g. T80, U53, U2000-2999. No prefix indicates both
TCP and UDP are defined. An empty implies all port addresses.
Packet Filter also works with Scheduling Rules, and gives user more flexibility on Access control. For detail
Packet Filter also works with Scheduling Rules, and gives user more flexibility on Access control. For detail
instruction regarding scheduling rule, please refer to Advanced Setting > Scheduling.
Click Save to save the settings and Undo to cancel.
Click Save to save the settings and Undo to cancel.
Inbound.Filter:.
To access the Inbound Packet Filter page, click on Inbound Filter on the bottom of the Outbound Filter page. All the
To access the Inbound Packet Filter page, click on Inbound Filter on the bottom of the Outbound Filter page. All the
settings on this page are similar to the one for the Outbound Filter.
Click Save to save the settings and Undo to cancel.