Neptune Pine Quick Setup Guide
Welcome to your new Pine.
Before turning on your new Pine, make sure you have
properly inserted your micro-SIM card into the micro-
SIM card slot. To turn on your Pine, press and hold
the Power/Lock button for a few seconds. Follow the
instructions onscreen to properly set up your Pine.
Before turning on your new Pine, make sure you have
properly inserted your micro-SIM card into the micro-
SIM card slot. To turn on your Pine, press and hold
the Power/Lock button for a few seconds. Follow the
instructions onscreen to properly set up your Pine.
Basic Navigation
To unlock your Pine, press the Power/Lock button once
and slide the Lock Screen in any direction. To turn off or
restart the Pine, press and hold the Power/Lock button,
then tap Power Off. To turn off the Pine’s screen but still
receive calls, text messages, notifications, etc., press the
Power/Lock button once. To adjust the volume, press the
Volume Up or Volume Down buttons. To return to the
default Launcher screen, touch the Home button. Touch
the Menu button to bring up any menu or settings of a
specific application or screen. Touch the Back button to
return to the previous screen.
To unlock your Pine, press the Power/Lock button once
and slide the Lock Screen in any direction. To turn off or
restart the Pine, press and hold the Power/Lock button,
then tap Power Off. To turn off the Pine’s screen but still
receive calls, text messages, notifications, etc., press the
Power/Lock button once. To adjust the volume, press the
Volume Up or Volume Down buttons. To return to the
default Launcher screen, touch the Home button. Touch
the Menu button to bring up any menu or settings of a
specific application or screen. Touch the Back button to
return to the previous screen.
Applications
To launch applications, tap the App Drawer icon in
the Home screen, and tap the application you wish
to launch. To add widgets to the Home screen, swipe
to the Widget grid in the App Drawer and drag the
Widget that you wish to have to your Home screen. The
Pine runs standard Android Jelly Bean, so all existing
Android applications are supported on the Pine and
may be sideloaded.
To launch applications, tap the App Drawer icon in
the Home screen, and tap the application you wish
to launch. To add widgets to the Home screen, swipe
to the Widget grid in the App Drawer and drag the
Widget that you wish to have to your Home screen. The
Pine runs standard Android Jelly Bean, so all existing
Android applications are supported on the Pine and
may be sideloaded.
App Drawer
Phone
The Pine has a built-in speaker and microphone. You
may make calls by speaking to the Pine in speaker mode
while holding it in your hand or when it is attached to the
Neptune Watchband. You may also make calls by using
standard Bluetooth headsets/speakers. The Pine does
not have an in-ear speaker receiver, therefore the Pine
may not be used close to the ear when making calls.
The Pine has a built-in speaker and microphone. You
may make calls by speaking to the Pine in speaker mode
while holding it in your hand or when it is attached to the
Neptune Watchband. You may also make calls by using
standard Bluetooth headsets/speakers. The Pine does
not have an in-ear speaker receiver, therefore the Pine
may not be used close to the ear when making calls.
Microphone
Headphone Jack
Speaker
Quick Start Guide
Micro-USB
Micro-SIM
Connector Slot
Neptune Watchband
The Neptune Watchband allows you to use your Pine as
a wrist-worn cellular device.
The Neptune Watchband allows you to use your Pine as
a wrist-worn cellular device.
To Insert Device
To insert the Pine into the Watchband, align the
Connector Slot on the top part of the Pine with the
metal connector pins.
To insert the Pine into the Watchband, align the
Connector Slot on the top part of the Pine with the
metal connector pins.
To Remove Device
To remove the Pine from the Watchband, push
downwards (see figure below) on the Device Release
Button on the holder of the strap, and gently take out
the Pine from the Watchband.
To remove the Pine from the Watchband, push
downwards (see figure below) on the Device Release
Button on the holder of the strap, and gently take out
the Pine from the Watchband.
Device Release Button
Press to release
Cameras
The Pine has two cameras, a VGA Front-facing Camera,
and a Rear-facing 5-Megapixel Camera. Both cameras
are equipped with LED Flash.
The Pine has two cameras, a VGA Front-facing Camera,
and a Rear-facing 5-Megapixel Camera. Both cameras
are equipped with LED Flash.
Rear LED Flash
5-megapixel Camera
Other languages available at:
neptunepine.com/instructions
Quick Start Guide
VGA Camera
Micro-SIM
Micro-USB
Menu
Home
Back
LED Flash
Volume up
Microphone
Power/Lock
Volume down
neptunepine.com