Kraftware Corporation EMC DS-16M2 User Manual
22
EMC Departmental Switches DS-16M2 and DS-32M2 Installation Guide
Installing the DS-16M2 and DS-32M2 Switches
CAUTION
!
If you are removing the switches from the cabinet, you must
remove the top switch from the back of the cabinet. You can remove
all switches below the top switch from the front.
remove the top switch from the back of the cabinet. You can remove
all switches below the top switch from the front.
15. Attach the fibre-optic cables to the switch and run the cables from
the switch to the appropriate device. Ensure each fibre-optic
cable has a minimum bend radius of 2 inches.
cable has a minimum bend radius of 2 inches.
Copyright © 2002 EMC Corporation. All Rights Reserved.
EMC believes the information in this publication is accurate as of its publication date. The information is subject to
change without notice.
change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS." EMC CORPORATION MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS
PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS
PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
Use, copying, and distribution of any EMC software described in this publication requires an applicable software
license.
license.
Trademark Information
EMC
2
, EMC, CLARiiON, and Navisphere are registered trademarks and Access Logix, SnapView and MirrorView are trademarks of EMC Corporation.
All other trademarks mentioned herein are the property of their respective owners.