Joovy DOLL OR STUFFED TOY BOOSTER 12 User Manual

To insure safe operation of your doll booster, please follow these instructions  
carefully.

•  Carefully remove doll booster from the box and plastic bag.
•  Discard all packaging materials properly.  Do not allow children to play with  
  them. 

•  Place doll or stuffed toy in doll booster on top of the safety harness.
•  Determine which pair of shoulder harness slots is even with or just above the  
  doll’s shoulders.  DO NOT use upper harness slots if they are below the doll’s  
  shoulders.  They will not hold the doll securely in a sudden stop or crash.
•  If the shoulder straps need to be adjusted, remove doll from booster.
•  From the back of the booster, unthread harness straps from the sliding  
  buckle.  REMEMBER THE CORRECT ROUTING OF THE STRAPS.
•  Remove the straps from slots in the seat and re-route them through the  
  desired slots, making sure they are not twisted.
•  Rethread the straps through the buckle.
•  Check that straps are secure by pulling on harness straps from the front.

•  Unbuckle the harness by pressing the button in the center of the buckle.  See 

Figure 1.

•  Open  the  harness  clip  by  pressing  the  button  and  unbuckling  the  clip.    See 

Figure 2.

•  Place the doll in the booster with the shoulder straps over its shoulders and 

chest.  Then place the crotch strap between the doll’s legs.