Jenn-Air 8101P549-60 User Manual

• Leave these instructions with the

appliance after installation is com-
pleted.

• Keep the User Guide and Installa-

tion Instructions for future use.

• This appliance must be properly

grounded.

• Insure that the power cord does not

contact the hot surfaces on the bot-
tom of ovens, cooktops, or any other
appliance.

• 2" x 4" or 2" x 2" lumber for runners and

brace

• Wood screws and adhesive or other

hardware for installing runners or shelf
to support warmer drawer

• Runners must be level, rigidly mounted

and capable of supporting 150 pounds.

• Saw

• Level

• Drill and 1/16" bit

• Phillips screwdriver

The warming drawer may be installed di-
rectly into a wall or wall oven cabinetry.

The warming drawer may be installed be-
low a countertop, a single, combo or double
oven or side by side using 2 drawers.

When installing the warming drawer with
a cooktop allow a 2" minimum from bot-
tom of a cooktop burner box to top of
cutout.

A 2" minimum clearance between oven and
warming drawer cutouts is required.

Parts provided: 4 Wood screws

1.Place carton on a flat surface.

2.Open the top of the carton and lift off  the

cardboard spacer.

3.Lift the warming drawer up and out of the

carton.

4.Place the drawer on top of the cardboard

to protect the drawer and the finished
flooring.

5.Remove all packing materials and tape.

6.Locate package containing 4 wood screws

and set aside.

The electrical power cord is located on the
right side of the warming drawer. Locate
the outlet within reach of the 56" long
power cord in adjacent cabinet, within 42"
of the right side or 16" from the left side of
the cutout. A recessed receptacle can be
installed on the right side of the cutout, 7"
maximum from the back of the cabinet.

30"

10 

1

/

2

"

23 

1

/

4

"

27 

7

/

16

" ProStyle Front

25 

1

/

4

" Curved Front

9"

27 

7

/

16

" ProStyle Front

25 

1

/

4

" Curved Front

Including handle