Jenoptik 10.0Z3 User Manual

27

ADVANCE SETTINGS

File name are followed by a 4-digit number that increases in sequence.  File numbering starts from 
0001 when a new folder is created.

If the highest folder number is 999 and highest file number exceeds 9999, the camera will display the 
warning message “Folder cannot be created”.  When it appears, try one of the following ways:

•  Reset the file number and plug in a new memory card.
•  Format the memory. The folder number and file number are initialized and renumbered from 

100 and 0001 respectively.

 Note: Do not change the folder and file names in the memory card using your computer.  It may 

be unable to playback the data using the digital camera.

Your camera can be connected to a TV allowing you to preview images and movie clips on the 
television screen. TV Out should be set to either NTSC or PAL depending on your region. 

NTSC

America, Japan, Taiwan, Korea

PAL

All of Europe

You can set USB mode to connect the camera with a printer or computer.  

Computer

To connect your camera to a PC.

Printer

To connect your camera to a printer.

You can choose a recorded image as the start-up image.
1.  Set the camera to the Playback mode.
2. Press

or

to select a desired image.

3. Press the MENU button, then press

or

to select S.IMAGE    

(

).

4. Press

or

to select an option, and then press the SET button.

5.  Set the camera to the Setup Menu .
6. Press 

or

to select S.IMAGE (

) then press

or the 

SET button.

7. Press 

or

to select a desired image and press the SET or 

the MENU button to apply the setting.

8. Press the MENU button to close the menu. 
 

 Note: The start-up image will not be deleted even if the original 

image is deleted or memory formatted.