Jenoptik 10.0Z3 User Manual

6

To remove the memory card, gently press on the edge of the card and release it.  Pull the card out 
and close the battery cover.
 

The digital camera is equipped with internal memory. If the memory card is not inserted in the camera, 
all images and movie clips recorded by the camera will be stored in the internal memory. If the 
memory card is inserted, images and movie clips are stored on the memory card.

The DCF protocol defines the format for image file data as well as the directory structure for the 
memory card. Images that are taken by a DCF camera can be viewed on DCF-compatible cameras 
from other manufacturers.

When the camera is first turned on, the date and time setting will 
not be correct.  So before using, be sure to set date and time.

1. Press the MENU button, using

or

to select SETUP (

) 

and press the SET button.

2. Press

or

to select DATE & TIME (

) then press

or 

the SET button to launch the Date & Time screen.

3. Press

or

tto change the value of the highlighted field.  

Press

or

to highlight another field.

4.  After adjusting the settings, press the SET or the MENU button 

to apply the setting. 

 

 

Note:
•  If you hold down

or

, you can change the value quickly.

•  If the batteries are removed for about two days, the Date & Time setting will be lost.  In this 

case, make these settings again.

GETTING STARTED