Jensen BT380 User Manual

 

This section demonstrates how to set up and install the BT380 into a vehicle. 

n

The Car Kit is designed to work with the 12/24-volt power supply of the 
vehicle. Refer to the following to install the junction box in a vehicle. 

1.  Locate a suitable place inside the car to mount the junction box. Select a 

dry place that avoids excessive heat and mechanical vibration. Ideally, the 
junction box should be hidden from view, but still easily accessible. 

Make sure that the cables are long enough to support the location of the 
junction box. If the cables are not long enough, do not lengthen the cables. 
Instead, relocate the junction box.

2.  Use two screws (not included) to fasten the junction box in place. 

 

3