Mocomtech CRS-300 User Manual
CRS-300 1:10 Redundancy Switch
Revision 16
Cables and Connections
MN/CRS300.IOM
4–24
4.5.3
Control and Data Connections – CRS-300 to Modem
shows what TMI and applicable data and control cables are needed for each of the
various data types.
Table 4-1. CDM-625 Cable Usage (RMI/TMI)
CDM-625 Cable Usage
(See Appendix A. CABLE DRAWINGS for cable details)
Driving Traffic Data Type
CRS-310 RMI / Cable(s)
TMI / Cable(s)
G.703
(Sect. 4.5.3.2)
(Sect. 4.5.3.2)
Bal/Unbal
Control: CA/WR0066
Data: CA-0000072
Data: CA-0000072
CRS-330/340
Control: CA/WR0066
Data: CA-0000072
Data: CA-0000072
Balanced
Control: CA/WR0066
Data: CA-0000072
Data: CA-0000072
CRS-325
Control: CA/WR0066
Data: CA-0000072
Data: CA-0000072
Unbalanced
Control: CA/WR0066
Data: PL/0813-8 (2X)
Data: PL/0813-8 (2X)
Control: CA-0000069
Data: PL/0813-8 (2X)
Data: PL/0813-8 (2X)
ASI (Sect. 4.5.3.3)
Control: CA/WR0066
Data: PL/0813-8 (2X)
Data: PL/0813-8 (2X)
CRS-325
Control: CA-0000069
Data: PL/0813-8 (2X)
Data: PL/0813-8 (2X)
EIA-422 (Sect. 4.5.3.4)
Control/Data: CA/WR0066
CRS-316
Control: CA-0000069
Data: CA/WR0066
Data: CA/WR0066
CRS-340
Control: CA/WR0066
Data:
Data:
HSSI (Sect. 4.5.3.5)
Control/Data: CA/WR0066
CRS-336
Control: CA-0000069
Data: CA/WR9189-6 with
CIC-60 Adapter Module
Data: CA/WR9189-6 with
CIC-60 Adapter Module
LVDS (Sect. 4.5.3.6)
Control/Data: CA/WR0066 CRS-340
Control/Data:
CA/WR0066
Ethernet
(Sect. 4.5.3.8)
(Sect. 4.5.3.8)
Wired-thru
(No Sub-Mux)
(Sect. 4.5.3.8.1)
(No Sub-Mux)
(Sect. 4.5.3.8.1)
Control: CA/WR0066
Data: CA-0000121
Data: CA-0000121
CRS-316 or
CRS-336
CRS-336
Control: CA-0000069
Data: PP/CAT5FF7FTGY
Data: PP/CAT5FF7FTGY
Wired-around
(Sub-Mux)
(Sect. 4.5.3.8.2)
(Sub-Mux)
(Sect. 4.5.3.8.2)
Control: CA/WR0066
Data (by User): CAT5 to
10/100/1000 Switch
Data (by User): CAT5 to
10/100/1000 Switch
N/A N/A
4.5.3.1 Required Control Cabling (Regardless of Driving Traffic Data Type)
For RMI connections:
The Control/Data Cable CA/WR0066 (DB-25F to DB-25M, 6’) provides
the serial communication path between the Redundant CDM-625 and the CRS-300 (via the
CRS-310 RMI) for all driving traffic data types, and is therefore always required.
CRS-310 RMI) for all driving traffic data types, and is therefore always required.
For all driving traffic data types
, refer to Figure 4-10 through Figure 4-12 to connect and
secure the CA/WR0066 cable between the Redundant CDM-625 and the CRS-310 RMI on the
CRS-300 as follows:
CRS-300 as follows:
• DB-25F connector labeled “Data Interface” on Redundant CDM-625, to
• DB-25M connector labeled “P1” on the CRS-310 RMI.
• DB-25M connector labeled “P1” on the CRS-310 RMI.
For TMI connections:
Depending on the driving data traffic type, in addition to its use as a
control cable between the Redundant CDM-625 and the CRS-310 RMI, the CA/WR0066 cable is
used as a control cable between the Traffic CDM-625(s) and the CRS-330 or CRS-340 TMI; as a
data cable with the CRS-316 TMI; and as a combination control/data cable when used with the
CRS-340 TMI.
used as a control cable between the Traffic CDM-625(s) and the CRS-330 or CRS-340 TMI; as a
data cable with the CRS-316 TMI; and as a combination control/data cable when used with the
CRS-340 TMI.