Mitsubishi WS-48313 Owner's Manual

Separate UHF and VHF Antennas

(Figure 1)

1. Connect the UHF and VHF antenna leads to the

UHF/VHF combiner.

2. Push the combiner onto ANT-A on the TV back

panel.

UHF/VHF combiners are not provided with

the TV. They are available at most electronic stores.

Note:

This TV will only be able to provide an analog

signal through ANT-A on the TV back panel.

��

� � ��

��

�

Figure 1. Connecting separate UHF and VHF

antennas.

Note: See page 5 for Outdoor Antenna Grounding

��

�

��

� � ��

��

Figure 2. Connecting twin lead antenna, coaxial lead

antenna, or wall outlet cable.

Note: See page 5 for Outdoor Antenna Grounding

Twin Lead Antenna, Coaxial Lead

Antenna, or Wall Outlet Cable

(Figure 2)

For antenna with twin flat leads:

1. Connect the 300ohm twin leads to the transformer.

2. Push the 75ohm side of the transformer onto

ANT-A on the TV back panel.

300ohm to 75ohm matching transformers are not provided

with the TV. They are available at most electronic stores.

For cable or antenna with coaxial lead:

3. Connect the incoming cable to ANT-A on the TV

back panel.

Note:

This TV will only be able to provide an analog

signal through ANT-A on the TV back panel.

Connecting an Antenna or Wall Outlet Cable

Additional connection cables are not provided

with the TV. They should be available at

most electronic stores.

Note: The TV back panel and connections shown here are for reference only and may vary by model.