Mitsubishi WS-48313 Owner's Manual

DVD Player with Component

Video

(Figure 9)

1. Connect the Component Video cables from

(YCb Cr or YPbPr) VIDEO OUT on the back of

the DVD player to COMPONENT (1 or 2) on

the TV back panel. The correct connections are:

Y to Y

Cb or Pb to Pb

Cr or Pr to Pr

2. Connect a set of audio cables from AUDIO OUT

on the back of the DVD player to COMPONENT

AUDIO Input (1 or 2) on the TV back panel.

• The red cable connects to the R (right)channel

• The white cable connects to the L (left) channel

NOTE:

Some video game systems support component

connections. Please refer to your video game

console Owner’s Guide.

NOTE:

If your DVD player supports progressive

scan playback, be sure to set your player

accordingly. Please refer to your DVD player’s

Owner’s Guide.

Other S-Video Device

(Figure 10)

1. Connect an S-Video cable from VIDEO OUT

on the device back panel to VIDEO INPUT-1 or

INPUT-2 on the TV back panel.

2. Connect a set of audio cables from AUDIO OUT

on the device back panel to AUDIO INPUT-1 or

INPUT-2 on the TV back panel.

• The red cable connects to the R (right) channel

• The white cable connects to the L (left) channel

If your S-Video Device is mono (non-stereo), connect

only the white (left) cable.

See Appendix B, page 65, for component video

signal compatibility information.

For digital audio connections, see your DVD

and A/V receiver Owner’s Guides.

��

�

��

� � � � �

�

��

� ��

��

� � � ��

��

�

Figure 9. Connecting a DVD Player with Component

Video.

Figure 10. Connecting an S-Video Device.

��

�

��

�

��

��
��

��

�

� �

��

��
��

� � ��

� ��

��

�

��

�

�
�

��

�

Connecting a DVD Player or Other S-Video Device

Note: The TV back panel and connections shown here are for reference only and may vary by model.