Mitsubishi Electronics WT03939X20 User Manual
1
1.1 Introduction of Maintenance Tools
The Maintenance Tools are comprised of the On-Line Monitor and the Off-Line Monitor.
The following three connection methods are available in the Online Monitoring.
(1) Monitoring by connecting the maintenance tool to MN converter (CMS-MNF,CMS-MNF-B,CMS-MNG-E)
The following three connection methods are available in the Online Monitoring.
(1) Monitoring by connecting the maintenance tool to MN converter (CMS-MNF,CMS-MNF-B,CMS-MNG-E)
via RS-232C.
(2) Monitoring by connecting the maintenance tool to MN converter (CMS-MNG-E) via USB.
(3) Monitoring through the central controller (G-50A) by connecting the maintenance tool to LAN.
(3) Monitoring through the central controller (G-50A) by connecting the maintenance tool to LAN.
A brief explanation of each of their function is provided here.
1.1.1 On-Line Monitor(via MN converter)
The On-Line Monitor is connected to the unit by a MN Converter (CMS-MNF,CMS-MNF-B,CMS-MNG-E)
and can monitor such areas as system data, unit data and operating data.
and can monitor such areas as system data, unit data and operating data.
(1) In case for local connection (via RS-232C)
Connecting PC installed with the maintenance tool to M-NET transmission line via MN Converter allows
conducting various monitoring and setting from the Maintenance Tool.
conducting various monitoring and setting from the Maintenance Tool.
MN Converter
(CMS-MNG-E)
(CMS-MNG-E)
RS-232C
USB
1
Foreword
MN Converter
RS-232C
cross
M-NET
M-NET
Maintenance
Tools PC
Tools PC
* To use the maintenance tool via G-50A (Network), license registration for the G-50A to be used is necessary.
Purchasing the license No. for each G-50A to be used, conduct the license registration through the Web
browser (http://[IP address of the G-50A]/ administrator.html). After selecting "Maintenance tool" of the optional
function on the Web Browser Screen displayed, enter the purchased license No..
browser (http://[IP address of the G-50A]/ administrator.html). After selecting "Maintenance tool" of the optional
function on the Web Browser Screen displayed, enter the purchased license No..
For the detail of the license registration, see Chapter 4 [Registering a License for Optional Functions] of Central
Controller Model: G-50A Web Browser Operation Manual (For manager).
NOTE:
• When the MN Converter (CMS-MNG-E) is being used in Remote Error Notification mode (see section
3.12), you cannot connect to the MN Converter (CMS-MNG-E) via RS-232C. Connect via USB.
NOTE:
• You cannot connect to the MN Converter (CMS-MNG-E) via RS-232C and USB at the same time.
Doing so may result in malfunctions.
Maintenance
Tools PC
Tools PC
Maintenance
Tools PC
Tools PC