Milestone Films Security Camera SC30-um-4 User Manual
Milestone XProtect Smart Client 3.0; User’s Manual
www.milestonesys.com
Page 37
Further Configuration
Further Configuration
Adjusting Camera Properties
In the Setup tab’s Properties section, you are able to adjust a number of settings for individual
cameras.
Note: Particular user rights may be required in order to access the Setup tab.
To adjust a camera’s properties, select the required camera in the view (the selected position will
be indicated by a bold border), then make the adjustments in the Properties section.
Camera Name
The Camera Name field displays the name of the selected
camera. The field is read-only.
Image Quality
The Image Quality setting determines the quality of the
images when viewed, but also affects bandwidth usage.
If the Smart Client is used over the internet, over a slow
network connection, or if for other reasons you need to
limit bandwidth use, image quality can be reduced on the
server side by selecting e.g. Low or Medium
Tip: You can quickly reduce the bandwidth usage for
all cameras in the view by reducing the image quality for a
single camera, then clicking the Apply To All button.
Frame Rate
Lets you select a frame rate for the selected camera.
Select between Unlimited (default), Medium (25% of
original frame rate) or Low (one frame per second).
IPIX Split Mode
Available only if the selected camera is an IPIX camera. IPIX is a technology that allows creation
and viewing of 360-degree panoramic images. The Smart Client supports up to four different
viewpoints from a single IPIX camera.
The IPIX Split Mode list lets you select the required spilt mode:
One by One lets you view a single viewpoint.
Two by Two lets you view four different viewpoints at a time.
When viewed on any of the Smart Client’s tabs, the IPIX camera will appear as specified, with
either one or four viewpoints from the same image: