Meridian America 562V.2 User Manual

There is interference on the radio
and/or television when the multimedia
controller is switched on

Before following the steps below, ensure all units are switched

off.

If this equipment does cause or suffer from interference to/from

radio or television reception then the following measures should

be tried:

❍ Reorient the receiving aerial (or antenna) or route the antenna

cable of the receiver as far as possible from the 562V

Multimedia Controller and its cabling.

❍ Ensure that the receiver uses well-screened antenna cable.

❍ Relocate the receiver with respect to the multimedia

controller.

❍ Connect the receiver and this product to different AC outlets.

Communication is not working
between the 562V Multimedia
Controller and other Meridian
products

❍ Check that all products are interconnected using the correct

comms leads.

❍ If the installation includes 200 Series or 600 Series units,

check that all 500 Series units are set to 200 mode.

Meridian Configuration program
repeatedly fails to talk to the product

❍ Check that you have selected a COM port.
❍ Check that no other program currently running is using the

COM port.

❍ Check that it is connected correctly.
❍ Turn off the 562V for a few seconds and turn back on, then

retry.

❍ Quit from all other programs and retry.
❍ Reboot the computer and retry.
❍ Ensure you are using the serial lead supplied with the product,

or a null modem cable.

❍ If you are using a laptop try turning off the screensaver or

power management software.