Maytag B6VMMX | Maytag Air Handler Technical Manual

•

Energy Efficient Variable Speed ECM Motor:  Advanced
technology provides 16 field-selectable cooling airflows
and  automatically  sets  heating  airflows  based  on  the
amount of installed heat.

•

Quiet Blower Operation: Extra quiet and smooth blower
on and off cycles.

•

Constant airflow: Motor automatically adjusts to

 different static loads.
•

Reduced air stratification:  This  results  in  improved
air quality by optimizing humidity removal and filtration
capabilities.

•

Multi-poised: Can be used in horizontal, upflow, downflow
and vertical applications.

•

Built in Filter Rack: makes the air handler easy to service.

•

Plug-in Heater Kit: Available in 5 kw through 30 kw (Not
for use in 115 Volt units)

•

Circuit Board: Incorporating blower time delay relay, low
voltage terminal strip, and heat-strip sequencing.

•

Breaker Accessibility: Breaker accessible from the front
of the unit when heater is applied.

•

Plastic Drain Pan: Provides corrosion resistance.

•

Durable Cabinet: Galvanized steel with a polyurethane
finish. The finish will endure 950 hours of salt spray and
resist corrosion 50% better than comparable units.

•

Designed to meet the requirements 610.2.A.2: Meets
Florida building code requirements for air leakage.

•

Thermal Expansion Valve: Factory installed externally
equalized  thermal  expansion  valve  provides  precise
refrigerant control under varying load conditions.

•

Cabinet Insulation:  1"  insulation  with  an  R-value  of
4.2 contributes to quiet operation and prevents cabinet
sweating in difficult applications.

•

Micro-Channel Coil Technology:  All

aluminum coil provides high corrosion resistance.

The B6VMMX Series of air handlers, when combined with
our heat pump or air conditioner, offers a full line of quality,
split system heating and cooling equipment.