Lucent Technologies Definity Enterprise Communication Server 8.2 User Manual

Issue 1

April 2000

Features and technical reference 

1146

Attendant Features 

■

Cont (control) lamp

Lights when the attendant activates Attendant Control of Trunk Group 
Access for the associated trunk group. Assign act-tr-grp and deact-tr-g 
buttons on the 

Attendant Console

 screen to allow the attendant to activate 

and deactivate control of the trunk group access.

■

Authorization Codes

Authorization codes do not collect when a trunk group has an incoming 
destination set to the attendant.

■

Automatic Route Selection and Automatic Alternate Routing (ARS/AAR)

Activating Attendant Control of Trunk Group Access removes the 
controlled trunk groups from the ARS and AAR patterns. Deactivating the 
feature reinserts the groups into the patterns. ARS calls do not route to the 
attendant.

■

QSIG

QSIG trunks do not support Attendant Control of Trunk Group Access.

■

Uniform Dial Plan 

Activating Attendant Control of Trunk Group Access removes the 
controlled trunk groups from preferences. Deactivating the feature enables 
the UDP to access the trunk groups.

Attendant Direct Extension Selection (DXS) with busy lamp field allows the 
attendant to track extension status (idle or busy) and to place or extend calls to 
extension numbers without having to dial the extension. 

The basic selector console has 8 Hundreds Select buttons and 100 DXS buttons. 
The enhanced selector console has 20 Hundreds Select buttons and 100 DXS 
buttons. You can assign 12 additional Hundreds Select buttons to feature buttons 
on the attendant console.

However, as you assign these feature buttons, note that the total number of 
Hundreds Select buttons per attendant (including both attendant-console feature 
buttons and selector-console buttons) cannot exceed 20.