Lucent Technologies Definity Enterprise Communication Server 8.2 User Manual

Issue 1

April 2000

System basics 

2

Logging into the system 

This procedure provides instructions for logging in from the system terminal not a 
remote terminal. 

To log into the system:

1. Enter your login name and press 

RETURN

. 

2. Enter your password and press 

RETURN

.

For security, your password does not display as you type it. 

3. Enter the kind of terminal you have or the type your system emulates and 

press 

RETURN

.

The Command prompt appears. 

If you enter the wrong terminal type, it can lock up your system. If 
the system is not responding to keyboard commands, type 

and press 

RETURN

. Enter the correct terminal type on the new screen 

and press 

RETURN

. If this does not work, turn the power off only on 

the terminal and then turn it back on. The terminal reboots and you 
can login again.

To log in for remote administration:

1. Dial the Uniform Call Distribution (UCD) group extension number.

The UCD group extension number is assigned when you set up 
remote administration.

■

If you are off-premises, use the Direct Inward Dialing (DID) 
number, an Listed Directory Number (LDN) (you must use a 
phone), or the trunk number dedicated to remote administration.

■

If you are on-premises, use an extension number.

If you dialed a DID number, dedicated trunk number, or extension, 
you receive data tone or visually receive answer confirmation.