Lucent Technologies Definity Enterprise Communication Server 8.2 User Manual

Issue 1

April 2000

Screen reference 

633

Feature-Related System Parameters 

Use this field to control the use of the 

INSPECT

 button for digital display phones.

Self Station Display allows a user to display the primary extension associated with 
a digital display phone. There are two methods: (1) enter a feature access code 
(FAC), and (2) use the 

INSPECT

 button. In either case, the display shows the 

primary extension associated with the phone where the FAC or 

NORMAL

 or 

EXIT

 

button is entered. In the case of the FAC, the display continues until a 
display-altering event occurs (for instance, going on-hook or receiving an 
incoming call). In the case of the 

INSPECT

 button, the display continues until the 

user presses the 

NORMAL

 or 

EXIT

 button or until a display-altering event occurs.

Regulations in some countries control the settings for this field. See your Lucent 
Technologies representative for assistance.

The primary extension does display when the 

INSPECT

 button is 

pressed.

 

The extension does not display when the 

INSPECT

 button is 

pressed.

Enter 

 to enable all trunk-to-trunk transfers. This allows 

telephone users to set up trunk-to-trunk transfer, go on-hook 
without disconnecting the call, and forward the call to a remote 
location.

Enter 

 (restricted public) to restrict all public trunks 

(CO, WATS, FX, CPE, DID, and DIOD).

 Enter 

 to restrict all trunks (except CAS and DCS) from 

being transferred.

. 

Enter the number of times the callback call rings at the calling 
station before the callback call is canceled.