Lucent Technologies Definity Enterprise Communication Server 8.2 User Manual
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing phones
50
Removing phones
3
3. Type
list groups-of-extension 1234
and press
RETURN
.
The Extension Group Membership screen shows whether the extension is a
member of any groups on the system.
member of any groups on the system.
4. Press
CANCEL
.
5. If the extension belongs to a group, access the group screen and delete the
extension from that group.
For example, if extension 1234 belongs to pickup group 2, type
change
pickup group 2
and delete the extension from the list.
6. Type
list usage extension 1234
and press
RETURN
.
The Usage screen shows whether the extension is used in any vectors, has
any bridged appearances, or used as a controller.
any bridged appearances, or used as a controller.
7. Press
CANCEL
.
8. If the extension appears on the Usage screen, access the appropriate feature
screen and delete the extension.
For example, if extension 1234 is bridged onto extension 1235, type
change station 1235
and remove the appearances of 1234.
9. Type
change station 1234
and press
RETURN
.
10. Delete any bridged appearances or personal abbreviated dialing entries and
press
ENTER
.
11. Type
remove station 1234
and press
RETURN
.
The system displays the station screen for this phone so you can verify that
you are removing the correct phone.
you are removing the correct phone.
Tip:
Be sure to record the port assignment for this jack in case you want to
use it again later.
use it again later.
12. If this is the correct phone, press
ENTER
.
If the system responds with an error message, the phone is busy or still
belongs to a group. Press
belongs to a group. Press
CANCEL
to stop the request, correct the problem,
and enter
remove station 1234
again.
13. Remove the extension from voice mail service if the extension has a voice
mailbox.
14. Type
save translations
and press
RETURN
to
save your changes.
Note that you do not need to delete the extension from coverage paths. The system
automatically adjusts coverage paths to eliminate the extension.
automatically adjusts coverage paths to eliminate the extension.