Lucent Technologies Definity Enterprise Communication Server 8.2 User Manual

Issue 1

April 2000

Screen reference 

725

IP Trunk Configuration Manager 

Configuration Manager lets you configure, administer, and troubleshoot 
DEFINITY ECS service in an easy-to-use tabbed interface featuring standard 
Windows

®

 property pages. 

The following table shows Configuration Manager tabs and property pages.

The standard command buttons that you use as you work in Configuration 
Manager are:

■

OK accepts your changes and exits Configuration Manager

■

Cancel cancels your changes and exits Configuration Manager

Info

Info property page: Shows you the version and build number of the 
installed DEFINITY ECS software.

Telephony

Telephony property page: Displays information about the 
connection between the switch and the TN802 MAPD and allows 
you to configure some aspects of this connection. Also displays 
information about DSP resources.

Telephony Advanced property page: Lets you adjust additional 
telephony parameters.

Voice/Fax

Voice/Fax property page: Allows you to view information about 
the capabilities of the DSP subsystem and configure some of its 
parameters.

Internet

Internet property page: Allows you to adjust the connection 
between the DEFINITY ECS application and the IP network for 
optimal performance.

Dial/Routing Plan

Dial/Routing Plan property page: Allows you to control the 
routing of incoming and outgoing calls over the DEFINITY ECS 
application. This is where you control access to the DEFINITY ECS 
application.

Service Logs

Service Logs property page: Allows you to configure the service 
logging options for the DEFINITY ECS application.

Quality of Service 
(QoS)

Quality of Service property page: Allows you to configure and 
monitor the quality of IP service to remote switches.