Lucent Technologies Definity Enterprise Communication Server 8.2 User Manual
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
825
Multifrequency-Signaling-Related System Parameters
17
A
NI for PBX
This field appears only when Outgoing Call Type is
group-ii-mfc
or
mfe
.
MFE Type
This field only appears when Incoming Call Type is
mfe
and the Outgoing Call
Type is
mfe
or
none.
Maintenance Call Type
Next ANI Digit
This field appears when Outgoing Call Type is
group-ii-mfc
.
Valid entries Usage
2
to
15
Enter the PBX identification number that is sent to the CO when
ANI is requested (by the CO) on a particular call but is not
available, such as on tandem tie trunk calls.
ANI is requested (by the CO) on a particular call but is not
available, such as on tandem tie trunk calls.
blank
Use for tandeming. If this field is blank, you must enter a value in
the ANI-Not-Available field.
the ANI-Not-Available field.
Valid entries
Usage
2/5
Determines which public signaling the switch will use.
2/6
Valid entries
Usage
1
The Belgium maintenance sequence is indicated when the CO
sends an MFC maintenance tone.
sends an MFC maintenance tone.
2
The Saudi Arabian sequence is indicated when the CO sends an
MFC maintenance tone.
MFC maintenance tone.
Valid entries
Usage
next-digit
next_ani_digit
send-ani
next_ani_digit
send-ani
Enter a value to determine whether the Next ANI Digit signal
will be the same as the “send-ani” signal or the “next-digit”
signal or another signal defined as “next_ani_digit.”
will be the same as the “send-ani” signal or the “next-digit”
signal or another signal defined as “next_ani_digit.”