LSI MegaRAID(R) 6 Gb/s SAS RAID Controllers 25083 User Manual

 

Note:

Some PCI-E slots support PCI-E graphics cards only; if a 
RAID controller is installed on those PCI-E slots, it will not 
function.

Step 5.

Configure and Install the SAS Devices, SATA II Devices, or 
Both in the Host Computer Case

Refer to the documentation for the devices for any 
preinstallation configuration requirements.

Step 6.

Connect the RAID Controller to the Devices

Use SAS cables to connect SAS devices, SATA II devices, or 
both to the MegaRAID 6Gb/s SAS RAID controller. 
See 

 for SAS 

cable and connector information. See 

 for information about connecting the controller to drives. 

85039-05

Edge of
Motherboard

32-bit slots
(3.3 V)

PCI-e
slot

Bracket Screw

64-bit slots
(3.3 V)

Press here

Press here