LSI MegaRAID(R) 6 Gb/s SAS RAID Controllers 25083 User Manual
MegaRAID 6Gb/s SAS RAID Controller Family
3-11
Copyright © 2009 by LSI Corporation. All rights reserved.
Figure 3.5
Card Layout for the MegaRAID SAS 9280-4i/4e RAID
Controller
Controller
Note:
Connectors J6A1, J6A2, and J6A3 are behind the
LSIiBBU07 when the iBBU is installed, but they are still
accessible.
LSIiBBU07 when the iBBU is installed, but they are still
accessible.
describes the jumpers and connectors on the SAS 9280-4i/4
RAID controller.
Table 3.5
SAS 9280-4i/4e RAID Controller – Connectors
Connector Description
Comments
J1A1
Universal Asynchronous
Receiver/Transmitter
(UART) debugging
Receiver/Transmitter
(UART) debugging
4-pin connector
Reserved for LSI use.
J1A2
LSI Test header
2-pin connector
Reserved for LSI use.
J1A3
Set Factory Defaults
connector
connector
2-pin connector
Reserved for LSI use.
J1A4
IPMI-style I
2
C
connector
3-pin connector.
Supports SES (SCSI Enclosure
Services) over I
Services) over I
2
C over internal I
2
C
backplane cable
J1A5
Modular RAID Key
header
header
2-pin shielded header
Enables support for RAID 5
configurations and self-encrypting disks
(SED).
configurations and self-encrypting disks
(SED).
85062-00
Port
3-0
J1A1
J6B1
J6A1
J6B2
J1A2
J1A3
J1A5
J1A3
J1A5
Port
7-4
J1B1
J2B2
J6A2
J6A3
J1A4