LSI 53C875A User Manual
Parallel ROM Interface
2-49
The LSI53C875A supports a variety of sizes and speeds of expansion
ROM, using pull-down resistors on the MAD[3:0] pins. The encoding of
pins MAD[3:1] allows the user to define how much external memory is
available to the LSI53C875A.
ROM, using pull-down resistors on the MAD[3:0] pins. The encoding of
pins MAD[3:1] allows the user to define how much external memory is
available to the LSI53C875A.
shows the memory space
associated with the possible values of MAD[3:1]. The MAD[3:1] pins are
fully described in
fully described in
To use one of the configurations mentioned above in a host adapter
board design, put 4.7 k
board design, put 4.7 k
Ω
pull-up resistors on the MAD pins
corresponding to the available memory space. For example, to connect
to a 64 Kbyte external ROM, use a pull-up on MAD2. If the external
memory interface is not used, MAD[3:1] should be pulled HIGH.
to a 64 Kbyte external ROM, use a pull-up on MAD2. If the external
memory interface is not used, MAD[3:1] should be pulled HIGH.
Note:
There are internal pull-downs on all of the MAD bus
signals.
signals.
The LSI53C875A allows the system to determine the size of the available
external memory using the
external memory using the
register in the
PCI configuration space. For more information on how this works, refer
to the PCI specification or the
to the PCI specification or the
register
description in
MAD0 is the slow ROM pin. When pulled up, it enables two extra clock
cycles of data access time to allow use of slower memory devices. The
external memory interface also supports updates to flash memory.
cycles of data access time to allow use of slower memory devices. The
external memory interface also supports updates to flash memory.
Table 2.6
Parallel ROM Support
MAD[3:1]
Available Memory Space
000
16 Kbytes
001
32 Kbytes
010
64 Kbytes
011
128 Kbytes
100
256 Kbytes
101
512 Kbytes
110
1024 Kbytes
111
no external memory present