Listen Technologies Repeater RP 6004 User Manual

 

The equipment has been tested and found to comply 
with the limits of the following standards for digital 
devices: 

• 

EN55103-1 (Emission) 

• 

EN55103-2 (Immunity)  

• 

FCC rules part 15, class A (Emission) 

This device complies with part 15 of the FCC rules. 
Operation is subject to the following conditions: (1) 
This device may not cause harmful interference, 
and (2) this device must accept any interference 
received, including interference that may cause 
undesired operation. 

These limits are designed to provide reasonable 
protection against harmful interference when the 
equipment is operated in a commercial or light 
industrial environment. The equipment generates, 
uses, and can radiate radio frequency energy and if 
not installed and used in accordance with the user 
manual it may cause harmful interference to radio 
communications. 

You are cautioned that any changes or 
modific ations not expressly approved in this manual 
could void your authority to operate this equipment. 

Do not install the unit in a location near heat 
sources such as radiators or air ducts, or in a place 

exposed to direct sunlight, excessive dust or 
humidity, mechanical vibration or shock. 

To avoid moisture condensations do not install the 
unit where the temperature may rise rapidly. 

To keep the cabinet in its original condition, 
periodically clean it with a soft cloth. Stubborn 
stains may be removed with a cloth lightly 
dampened with a mild detergent solution. Never use 
organic solvents such as thinners or abrasive 
cleaners since these will damage the cabinet. 

Save the original shipping cardboard box and 
packing material; they will become handy if you 
ever have to ship the unit. For maximum protection, 
re-pack the unit as originally packed from the 
factory. 

The individual units in the DCS 6000 system are 
minimum covered by 12 months warranty against 
defects in materials or workmanship. 

.