Lexicon Blu Ray Disc Player BD-30 User Manual
Lexicon
18
Connecting to a Receiver/Amplifier with Dolby Digital or DTS Decoder
Method 6 – Digital Audio Connection
• Please use either a 75-Ohm coaxial digital audio cable with RCA-style connectors or an S/PDIF optical digital audio cable to connect one
of the digital audio outputs to the corresponding input terminal on your A/V receiver.
NOTE
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” is a registered trademark of DTS, Inc. and “DTS-HD Master Audio | Essential” is a trademark of DTS, Inc.
• Due to bandwidth limitations, high resolution audio formats such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution and DTS-HD
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” is a registered trademark of DTS, Inc. and “DTS-HD Master Audio | Essential” is a trademark of DTS, Inc.
• Due to bandwidth limitations, high resolution audio formats such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution and DTS-HD
Master Audio cannot be sent through the coaxial or optical digital audio output. A reduced resolution version of the same audio track will be
output instead. To listen to high resolution audio formats in their best quality, please use the HDMI connection if you have a receiver that handles
HDMI audio (see page 16) or use the multi-channel analog outputs if you do not (see page 17).
output instead. To listen to high resolution audio formats in their best quality, please use the HDMI connection if you have a receiver that handles
HDMI audio (see page 16) or use the multi-channel analog outputs if you do not (see page 17).
• Due to copyright restrictions, SACD audio cannot be sent through the coaxial or optical digital audio output. To listen to SACD, please use the
HDMI or analog audio connections.
Installation
Receiver/Processor with Dolby Digital or DTS Decoder