Lexicon Blu Ray Disc Player BD-30 User Manual

BD-30 Blu-ray Disc Player

• On – The video screen will be split in half. The left side

demonstrates the result of the VRS

™

video processing,

and the right side shows video without the help of VRS

video processing.

• Off – Normal viewing mode.

• A/V Sync – To add a delay to the HDMI audio output. If

you experience an audio/video synchronization problem,

you may use this option to add a slight delay to the audio

so it is synchronized to the video.

• Use the UP/DOWN ARROW buttons to highlight the A/V

Sync menu item. Press the ENTER button.

• Press the LEFT/RIGHT ARROW buttons to adjust delay.

The audio delay can be adjusted in 10ms steps.

• Press the ENTER button to confirm the new A/V Sync

setting and return to the Audio Processing Setup Menu.

9. Screen Saver: To turn on/off the screen saver function. The

screen saver is designed to minimize burn-in concerns for

plasma and CRT display devices. The available options are:

• On – After about 3 minutes of inactivity, the player will

show an animated Lexicon logo moving on a black

background. This allows most areas of the screen to rest

and gives all areas an equal opportunity to refresh.

• Off – The screen saver will not be activated. Use this

option if your TV does not have a burn-in issue.

• Energy Saver – Video output will be turned off after

3 minutes of inactivity. Many projectors and LCD TVs

will go into a standby or sleep mode and turn off their

projection lamp or LCD backlight lamp, thus saving energy

and prolonging the lamp life. When you press any button

on the Lexicon remote control or the player’s front panel,

the screen saver will be cancelled and video output will be

restored. If your TV is already in standby or sleep mode,

you may need to wake up the TV by pressing a button on

its remote or control panel.

Picture Adjustment

Picture Adjustment is a special section of the Video Setup menu. It

allows you to fine-tune many picture control parameters in order

to achieve the optimal picture quality and visual result. To use

Picture Adjustment, press the SETUP button on the remote control

to enter the player’s Setup Menu, and then choose “Video Setup”

– “Picture Adjustment”. The Setup Menu will be replaced by the

Picture Adjustment menu:

To change a picture adjustment parameter, use the UP/DOWN
ARROW buttons to highlight the parameter, and use the LEFT/
RIGHT ARROW buttons to change its value.
To aid in the adjustment of picture control parameters, the picture

adjustment menu will be reduced to only show the parameter

being adjusted once you press the LEFT/RIGHT ARROW buttons.

The reduced menu will be positioned near the bottom of

the screen.

Brightness

-16

+16

Setup Menu Options

Picture Mode

Brightness

Contrast

Hue (Analog)

Saturation

Detail Enhancement

Edge Enhancement

Noise Reduction

Y/C Delay

Border Level

-16

+16

Exit

Normal