Lenmar Enterprises Lenmar PowerPort Laptop Battery PPU916RS Leaflet

Thank you for purchasing the PPU916RS PowerPort Laptop Battery for notebook and laptop computers.  The 

PPU916RS provides a 16 & 19 VDC output that can provide up to 3 hours of additional runtime. Also 

included is a USB output port for charging your cell phone, PDA, MP3 player or any other device that can be 

charged from a standard USB port.  Please note: This is not compatible with tablets.

Please make sure you follow the two steps outlined below to determine the right settings compatible with 

your notebook or laptop computer.

The PPU916RS works only with notebook and laptop computers that have “center positive” polarity.  Please 

confirm that your laptop has “center positive” polarity before using the PPU916RS.  You may look for the  

below in your notebook or laptop user manual (please see image to the right). 

Please determine the required voltage needed for your 

notebook or laptop computer. Once you have determined 

the correct voltage, slide the switch on your PPU916RS

to either 16V or 19V.

In some cases you may determine the desired voltage is between whole numbers such as 18.5VDC. In this case 

you would use the 19V setting.  In the case of 20VDC, also choose the setting of 19VDC. 

3.)  Review the voltage indication marked next to 

the input jack on the notebook or laptop 

computer to be powered.

1.) Review the power or ID plate on the original 

AC / DC power supply that comes with your 

notebook or laptop computer. Look for the word 

“DC RATING or OUTPUT” followed by a number 

and VDC*. 

2.) Review the power ID plate on your notebook or    

      laptop computer to be powered. This is usually 

      found on the bottom of your computer.  Look 

      for the word “DC RATING or INPUT” followed by 

      a number and VDC*.

1.

2.

3.

4.

313-100-33-0410 r2 y1

The PPU916RS must be charged before initial use to power up your notebook or laptop computer. 

*Note: The specific notation “VDC” might not be indicated. Instead the following international symbol 

shown might be used 16          . In some cases you may determine the desired voltage is between whole 

numbers such as 15.5VDC. In this case use the next higher voltage setting.  For example, use 16VDC if 

the desired voltage is 15.5VDC. 

Select the adapter tips that correspond to your laptop or notebook brand and model by visiting www.len-

mar.com/adaptertips. Verify the fit of the power tip by plugging it into the input jack on your laptop. 

It is important that the center contact or pin be the correct size to insure proper electrical contact. The tip 

should slide in as easily as the original adapter tip. Do not force it. If it does not fit easily please verify that you 

have the correct tip listed in our reference.

The PPU916RS comes with 8 power tips, and 7 charging tips and one 30” power cord. These tips will 

allow you to charge the PPU916RS and also power your laptop.

Determine the correct power tip and connect it to the included 30” power cord then plug it into your 

laptop. The power tips consist of models L01D, L51D, L52D, L53D, L54D, L55D, L61D, and L62D. The 

charging tips are made to connect to your existing AC Adaptor and then be plugged into the “IN” jack on 

the PPU916RS. They are the right angle tips consisting of models: L01, L51, L53, L54, L55, L61 and L62. You 

may also use your existing AC Adapter tip if it fits. 

To charge the PPPU916RS,  use your notebook or laptop 

computer’s existing AC Adapter.  Connect the AC Adapter 

to the correct charging tip.  Then plug in the tip into “IN” 

port of the PPU916RS. Approximate charge time is 5 

hours. You will see an indicator on the 5th LED light. The 

light will be red while charging and will turn blue once 

the charge is complete.

Plug the supplied 30” power cable into the “OUT” port on the PPU916RS. Attach the correct power tip to 

the other end of the cable and plug this into the “DC IN” port of your laptop. 

Press the button on the top of the PPU916RS to show remaining capacity, there are 4 indicator lights.  

The PPU916RS has a built in USB port for the convenience of 

charging your cell phone, PDA, MP3 player or any other 

device that can be charged from a standard USB port. For 

best results use an OEM or factory approved USB cable.

Please note: This is not compatible with tablets.

• Keep the PPU916RS dry, if it gets wet wipe it dry immediately.

• Use and store it in normal temperature environments.

• Handle the PPU916RS carefully, do not drop it. Do not use the PPU916RS if the cords become damaged.

• Keep the PPU916RS away from dust and dirt; wipe it with a cloth occasionally to keep it clean.

• There are no user serviceable parts inside! Modifying or tampering with its internal components can cause a 

  malfunction and will invalidate its warranty. If your PPU916RS is not performing as it should during the  

  warranty period, contact Lenmar for warranty service.

PPU916RS

PPU916RS

OUTPUT CABLE

1 2 3 4 5

BUTTON

LED

CHARGING

INDICATOR

OUTPUT TIP

SLIDING BUTTON BETWEEN 16V/19V SELECTION

Lenmar product is warranted to be free of defective parts and workmanship for stated period from the 

original date of purchase when sold through our website or our authorized retailers. Warranties are not 

transferable. The warranty excludes damage resulting from accident, misuse, modification, delay or loss of 

use, damage to equipment or by normal wear and tear.

ALL WARRANTY CLAIMS ARE PROCESSED ONLINE AT THE FOLLOWING LINK:

WWW.LENMAR.COM/WARRANTY

Warranty claims made after 60 days from the original date of purchase, will require a processing fee. Details 

will be included while completing the online warranty request. Payment can be made via credit card when 

completing the warranty form or a check can be included with the package when it is returned to Lenmar. 

Once the request is completed, you will be emailed with a confirmation WRA number and instructions on how 

to return the item for a warranty replacement. 

The following statement is required in the state of California pursuant to the settlement of an action brought 

by the Mateel Environmental Justice Foundation against multiple electronics and appliance manufacturers

For more information about product compatibility and adapter tips, please go online and visit www.len-

mar.com/adaptertips.

For additional questions, comments, or to explore other Lenmar power solutions, visit our website at: 

www.lenmar.com, email info@lenmar.com, or call 800-424-2703 between the hours of 8am-5pm PST. 

Chemistry: Lithium-Polymer

Charge input: 15V ~ 25 V 2.5A~ 4A adapter input

Discharge output: 5.3 V, 16V, 19V

CAPACITY

INDICATOR

1.

2.

3.

CHARGING TIP

POWER TIP

PPU916RS

CHARGE TIP

ORIGINAL NOTEBOOK AC ADAPTER

LED 1 indicates   0% to 25%

LED 2 indicates 25% to 50%

LED 3 indicates 40% to 60%

LED 4 indicates 75% to 100%

USB PORT

Lithium-Polymer battery must be

recycled or disposed of properly.

Charge time: Approx 5 hours.

Output Wh: 63Wh / 16,500mAh

CENTER POSITIVE